Q. What are the notable
differences between the Cisco Catalyst 2960-X and 2960-XR switches?
A. The Cisco Catalyst
2960-XR switch models have the following additional capabilities in addition to
the features in the 2960-X models:
• Dual-FRU power supply with integrated fan
• Layer 3 features with IP Lite feature set
• Configurable 8 queues per port (standalone)
• 48 Ether channel groups
Cisco Catalyst 2960-X
Series front panel sticker has the feature set name. From the rear of the Cisco
Catalyst 2960-X Series Switch, the LAN Lite models do not support stacking. The
left side will not have a location for the FlexStack-Plus module to be
inserted.
From the Cisco IOS
Software command line, there are two ways to tell which software image the
switch has.
• The last letter in the product ID. If the last letter is "-L,"
it's LAN Base. If it's "-LL," it's LAN Lite. If it's "-I,"
it's IP Lite.
For example:
WS-C2960XR-48FPS-I is IP
Lite.
WS-C2960X-48LPS-L is LAN
Base.
WS-C2960X-48TS-LL is LAN
Lite.
Cisco Catalyst 2960-X
Series Switches use the Universal image, but no license is required. The
feature set is bound to the hardware model type and cannot be changed. For
convenience, a single software image is used for all Cisco Catalyst 2960-X
switches, regardless of whether they are IP Lite, LAN Base, or LAN Lite models.
Q. Can Cisco Catalyst
2960-X switches stack with Cisco Catalyst 2960-XR switches?
A. No. Cisco Catalyst
2960-X and 2960-XR switches can't stack together since they don't share common
feature set model.
WS-C2960S-48LPD-L , WS-C2960S-48FPD-L Cisco 2960S popular switch for you.
没有评论:
发表评论